Fire documentation
Documentation is an important instrument in quality and safety work. The purpose of documenting is to contribute to the right product in the right place. The documentation clarifies the structure of the system and shows the way to what is possible or subject to expert evaluation.
Here you will find clear facts about third-party documentation and what Woodsafe Timber Protection AB can help you with.
If you do not find what you are looking for, contact customer service:
+46 (0) 10 206 72 30
kundtjanst@woodsafe.com
Fire documentation
Let us explain
Fire protection is about documentation. Knowing which documentation is correct and interpreting the information is not always simple.
Are you unsure?
What documentation do you need?
Let us guide you
When you intend to use fire-protected wood, it is not enough to just look at the fire class. You must have an overview of the whole, which means that you must compare the conditions for which you will use the wood product in relation to how the current product you intended to use and how the result was achieved.
Some important factors to check are:
- Wood type and thickness
- Mounting ratio
- Split panel
- Air gap
- Surface treatment
- Insulation
- Substrate
In addition to these prerequisites, you need to ensure correct documentation:
- Declaration of performance, current EN standard, system 1
- CE certificate, current EN standard, system 1
- Type approval certificate (national regulations)
Remember that the documentation below is not equivalent to certifying documentation:
- Statement from individual actor
- Statement from fire expert
- Statement from non-accredited institute
Fire documentation
Our offer
Woodsafe Timber Protection AB in collaboration with selected partners offers approved system solutions where the whole is included as quality assured by a notified body.
This is our documentation offer
Example on documentation
To verify the performance of the wood product when impregnated is significantly more extensive than comparative fire painting. If you cannot find what you are looking for on our website, we recommend that you contact our technical support (+46 10 206 72 37) for guidance.
Examples of documented characteristics:
- Declaration of Performance (DoP)
- Air gap
- Vertical mounting
- Horizontal mounting
- Split panel
- Insulation
- Substrate
- Surface treatment
For more information, contact customer service +46 10 206 72 30 alternatively kundtjanst@woodsafe.com
Third-party documentation
Let us explain
Woodsafe Timber Protection AB engages RISE for testing, classification, certification with an agreement on third-party manufacturing control. We do it for a reason. Do you know why?
Our third-party documentation
Let us guide you
Documentation is an important instrument in quality, safety, follow-up and evaluation work. The purpose of documenting is to contribute to the right product in the right place. The documentation clarifies the structure of the system and shows the way to what is possible or subject to expert evaluation.
This is how the quality of our services is ensured:
- CE certificates issued by RISE
- Type approval certificate via RISE
- ISO 9001:2015 via RISE
- ISO 14001:2015 via RISE
- FR -approved treater via WPA (UK)
In addition to these certificates there are:
- Declaration of Performance
- Delivery Certificate
Third-party documentation
Our offer
Woodsafe Timber Protection AB hires the testing and certification institute RISE (No.0402). The documentation we provide is only issued by a notified body.
This is our documentation offer
Example on documentation
Woodsafe's documentation is based on third-party independent accredited institutes and control bodies. This means that product characteristics and continuous control are the basis for Woodsafe's authorization to place products on the market according to current national legislation and European regulation.
Woodsafe provides, among other things:
- Declaration of performance according to the requirements of EN14915 (solid wood )
- Declaration of performance according to the requirements of EN13986 (wood-based panels)
- CE documentation according to the requirements of the Construction Products Ordinance 305/2011
- Type approval certificate according to BBR and PBL (Plan, and Building Act)
The documentation is quality assured and issued by:
- RISE
- WPA (Wood Protection Association)
Checklist fire documentation
Let us explain
Fire protection is covered by legal requirements where performance must be proven via certifying documentation. We know what certifying documentation means. What do you know about the requirements?
System for document control
Let us guide you
System for document control (SDK) consists of different checklists depending on what you want to check and compare. These checklists are not mandatory, but they make it easier for you when prescribing, comparing and procurement. The appendices comply with the legal requirements and recommendations described, among other things, in the Housing Authority's building regulations.
Examples of checkpoints under each appendix.
Appendix D: Durability of Fire Performance Checklist
- EN16755 INT1, INT2, EXT
- BS -EN16755 INT1, INT2, EXT
- Requirement for surface treatment
- No requirement for surface treatment
- Certification body
Appendix E: Property control checklist , certification
- Type of wood
- Mounting condition
- Brand class
- Use class
- Certification body
- Quality system
Appendix L: Checklist equivalent product
- Method
- Fire class
- Types of wood
- Certification
- Durability
Checklist fire documentation
Our offer
Woodsafe Timber Protection AB's documentation is based on third-party independent accredited institutes and control bodies.
This is our checklist - document control system
Example on documentation
Woodsafe's documentation is based on third-party independent accredited institutes and control bodies. This means that product characteristics and continuous control are the basis for Woodsafe's authorization to place products on the market according to current national legislation and European regulation.
Woodsafe checklist is:
- Declaration of performance according to the requirements of EN14915 (solid wood)
- Declaration of performance according to the requirements of EN13986 (wood-based panels)
- CE documentation according to the requirements of the Construction Product Regulation 305 /2011
- Type approval certificate according to BBR and PBL (Plan, and Building Act)
The documentation is quality assured and issued by:
- RISE
- WPA (Wood Protection Association)
Remember that the documentation below is not equivalent to certifying documentation:
- CE certificates issued by RISE
- Type approval certificate via RISE
- ISO 9001: 2015 via RISE
- ISO 14001:2015 via RISE
- FR-approved treater via WPA (UK)
Other:
- Declaration of performance
- Delivery certificate